How to maintain the stage lighting equipment beam light?

Many people do not know much about the stage lamps and lantern the stage lamps and lanterns are the most important maintenance of all lamps and lanterns, the following is an introduction to the stage lamps and lanterns' daily need to pay attention matters.

Prohibit the temperature is too high

1. Under normal circumstances, the best ambient temperature of the stage lamps and lanterns does not exceed 40 ℃. When the ambient temperature exceeds 40℃, attention should be paid to suspending the use or stopping the operation.

2. Pay attention to ultraviolet

Contact the light bulb at temperatures to avoid UV damage to the eyes.

Do not use equipment without lenses and lids

1. If the lamp head mirror and other lamp covers are damaged and broken, replace the new parts immediately.

Prevent electric shock and high voltage.

On the other hand, the stage lighting apparatus and equipment setter must have the appropriate qualifications to operate. Before setting up, please confirm that the power supply voltage you use must be consistent with the power supply voltage shown in the luminaire, and overload or leakage protection is required

2. each luminaire must be properly grounded and electrically installed by the relevant standards; when installing and removing bulbs or replacing fuses, power to the equipment must be disconnected

3. used in thunderstorms or humid environments.

The sanitation of luminaires is regularly inspected and cleaned

For stage lighting fixtures with blowers, be sure to clean the blowing outlet and blowing outlet to keep it smooth. Clean carefully at least once a month.

Bulbs require regular maintenance and care.

The most important optical components in the stage lighting equipment are gently blown off the surface with a vacuum cleaner or air gun, removing dust and residue with non-woven paper or non-woven fabric, soaking alcohol with non-woven fabric, and removing dust and residue with distilled water and soft cotton cloth.

Coated color chips and optical lens components, fragile and easy to scratch, do not use destructive solvents for cleaning.

1, should be carefully handled stage lamps and lanterns to avoid the collision, falling, etc. 

2, noting that they should not be used in sandy and dusty conditions.

3, After the performance, use the console to reduce the temperature, the luminaire does not cut off the power and continues to work (let the fan inside the luminaire continue to work to reduce the temperature inside the luminaire).

After the event, please move the lightbox into a special moisture-proof and shockproof box, the fixed installation of the lamp should pay attention to anti-dust, anti-impact, and other issues.